Daymak Boomerbuggy Covered User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
17
Technical Data
This section provides you with the technical speci cations for your e-scooter.
The Motor and Wheel Assembly
The Smart Scooter has a 1200 Watt magnetic motor on the rear wheel hub. This type of motor has excellent
low-end torque and high effi ciency when working within its range. Note that while the motor is very quiet, it
does produce some noise. Also attached to the rear hub are speed reduction gear and the speed free clutch.
The Freewheel
The wheels have freewheels, so the e-scooter’s drive train is not  xedly geared. This means that when coast-
ing or traveling downhill, you can turn o the engine and your e-scooter will continue to move without
slowing. This feature will allow you to achieve faster speeds when coasting, moving downhill or moving with
the wind. It will also allow you to conserve electrical power, because you will be able to let to the motor rest
while moving.
The Controller
Daymak pioneered the development of intelligent component control in e-scooters. The “D- Drive” tech-
nology developed by Daymak is the brain of your e-scooter. It allows your e-scooter to achieve faster accel-
eration, to climb steeper hills, and to save energy. In future, it will allow for other ways of recharging your
e-scooter’s batteries, such as by using solar or wind power.
The electronic controller is located under the seat assembly. This controller e ciently regulates the speed
and electronic functions of the scooter. It allows for stepless speed adjustment, shuts o the motor when
the brakes are activated, has low voltage protection and has fuses to prevent excess current from damaging
the e-scooter’s systems.
The Governor
A key component of the controller is the Governor. The Governor regulates the speed of the e-scooter. It
prevents the motor from assisting riders when the e-scooter’s speed surpasses
32 km per hour.
The governor’s primary function is to make sure that the motor functions e ciently. If the governor is not
functioning, the mileage of the e-scooter will be dramatically reduced, and its performance will su er.
Disabling the governor voids the warranty, and may damage your controller.
This speed limitation to 32 km per hour is required by government regulations. Traveling faster than 32 km
per hour through motor power alone is illegal in Canada and could result in serious  nes or penalties, unless
your vehicle is insured for liability, is registered and you are licensed to drive.
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments