Daymak Boomerbuggy Covered User Manual download pdf (Page 12)

The Battery

The Boomerbuggy series utilizes two maintenance free, sealed lead acid batteries. Battery

performance is a ected by various factors including: temperature, terrain, the weight of

the user, and overall usage for the batteries. The battery level indicator is only a guide for

judging the amount of charge in the batteries. The true charge of the batteries will display

once the scooter is in drive.

To optimize the battery life, only charge the scooter once the batteries are at approximate-

ly 20%

When storing your unit, be sure to charge the scooter at least once every two weeks to op-

timize the battery’s life. Leaving the batteries completely discharged can cause irreversible

damage to the batteries and may need to be replaced.

Charger and Charging

To charge your scooter,  rst make sure that the bike is o . Plug the charger into the charging

port amd then plug the charger into the outlet. Once connected, a red light should appear

on the charger; this indicates the scooter is being charged. When the scooter is completely

charged, the charger will automatically terminate the charge and the light will turn green.

The charger requires a minimum feedback voltage signal from the batteries in order to

begin the charging cycle. If your batteries are severely discharged for a long period of time,

the charge may not receive the necessary feedback and therefore the batteries will not

charge. If this occurs, contact your nearest Daymak dealer for assistance.

Always insert the charger into your scooter before the outlet. Failure to do so has a possi-

bility of short- circuiting the scooter.

Never let your batteries completely discharge. Doing so can result in irreversible damage

to the batteries.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Daymak Boomerbuggy Covered User Manual Page 12